Safety Instructions - Fastbind Elite User Manual

SAFETY
Section 2
SAFETY
Operate Safely
Safety Symbols
Handling and Location
Power Supply
www.maping.com
Before installing and operating Fastbind Elite, the safety instructions and
recommendations in this User's Manual must be studied carefully. In this way one
can ensure to get the most out of the new binding machine and operate it safely.
Store this document within easy reach of personnel operating or maintaining the
unit.
Following symbols are used to warn against dangers or possible sources of
danger. Become familiar with them.
WARNING: Failure to observe may result in personal
!
injury, death or equipment damage.
CAUTION: Hot surface or hot material. Failure to
!
170 ºC
observe may result in burns.
CAUTION: Failure to observe may result in equipment
!
damage.
•
Note that the machine weights 52 kg (~105 lb)! When handling the
machine, two persons should always be used. Do not lift from the
!
rail!
•
Install the machine on a stable horizontal surface, close to a power
outlet.
•
Fastbind book binding machines are designed for indoor use only.
Avoid drafty, mois and dusty environment. For normal operation, the
ambient temperature range should be +15 to +30 °C.
•
Before using the machine, check that the operating voltage and other
specifi cations indicated on machine's identity plate match with the
specifi cations of the power source. This plate is located at the rear of
the machine.
•
This unit may only be connected to properly earthed power outlet.
•
Never damage, modify or place heavy objects on the power cord. Do
not use the machine if the power cord is bundled, knotted or damaged.
When unplugging the power cord, always grasp the plug to pull it out.
•
Switch off the unit and pull out the mains plug prior to all cleaning and
maintenance.
1 - 2
REV. d5 Elite Multilang
© 2004.12 Maping Co