Fastbind Elite User Manual page 14

6.3.2
6.4. FINISHING THE BINDING
6.4.1
a)
6.4.2
a)
c)
rev. d5 Elite Multilang
© 2004.12 Maping Co
Turn clamp handle down, pull the clamp open. Remove the
book by lifting the turntable slightly with the clamp handle.
Pressing the spine of the hardcover book: close the book
and place it between the clamp and turntable (spine against
positioning deck).
a)
b)
b)
Attaching tacky lining sheets (end papers) to covers. Lift the
book on top of closed clamp.
a)
b)
c)
b)
d)
d)
1 - 13
BINDING A HARDCOVER BOOK
Close the clamp and press the spine.
Open the clamp and turn the book around. To press the
other side of the spine, place the book again between
the clamp and turntable. Close the clamp and press the
spine.
Open the clamp and remove the book.
Pull silicon lining paper to half way. Bend the cover
slightly to arc and close it to half way.
Close the cover and press it slightly. Pull the rest of the
silicon release paper off. The fi rst cover is done.
Turn the book over. Repeat steps a) and b) for the
other cover.
To fi nish the spine, press your fi ngers together and
follow the folding line all the way down.
www.maping.com