Fixing To The Wall And Floor - Mitsubishi Electric VS-60HS12U Setup Manual

2.3.5 Fixing to the wall and floor

1 Firmly fix the base stands onto the floor by means of fixing brackets and/or anchor bolts.
2 Fix the upper back part of the cubes to the wall behind by means of fixing brackets.
· To prevent the cubes from falling due to unpredictable events such as earthquakes or shocks, fix them firmly to
the wall and floor. Furthermore, carefully confirm the strength of the fixing areas (wall and floor) of the installation
room. The fixing method differs depending on the number of cubes.
After the completion, proceed to "Adjustment" (page 19).
18
VS-60HS12U Set-up Manual
Bolts
Floor-fixing brackets
Adjusters
Wall-fixing brackets
Bolts
Anchors