Input Memory Setting; Basic Setting - Mitsubishi Electric VS-60HS12U Setup Manual

3 . 6 I n p u t m e m
3 . 6 I n p u t m e m
Input memory menus can adjust each input signal in a
window displayed top overlay priority. The settings can be
memorized in 128 input memories.
[INPUT B] button on the remote control shows INPUT
MEMORY menu. Or select INPUT MEMORY in TOP menu.

3.6.1 Basic setting

Normally, check and adjust these basic setting items.
The monitors can be customized more with custom
setting items (page 39) as necessary.
Input port select
Select an input port to be displayed or adjusted. [INPUT
A] button on the remote control shows INPUT SELECT
menu. Or select INPUT SELECT in TOP menu. Selected
input signal will be displayed on top.
· A window may not be displayed on monitors
depending on the window position. Reselecting TILE
or DOT BY DOT in the next chapter restores the
window on that monitor.
· Be careful that windows also may not be displayed if
the screen or windows are muted.
In Wallaby, it can be selected in Input > Input Selection.
o r y s e t t i n g
o r y s e t t i n g
TOP
INPUT SELECT
INPUT MEMORY
WINDOW ARRANGEMENT
MEMORY SCAN
CLOCK PHASE Analog
AMP. GAIN Analog
INPUT MEMORY SAVE
Full screen display
INPUT MEMORY > WINDOW ARRANGEMENT
You can display the full image of the input signal on a
single monitor. On TILE or DOT BY DOT menu, selecting
SET OK? > YES automatically arranges the window on
that monitor. The initial setting is TILE.
n TILE: Selected image is resized to fit into a single
screen.
0
H=1, V=1
1079
1080
H=1, V=2
2159
· When aspect ratio setting (page 44) in display
memory is FREE, the original aspect ratio is ignored
to be displayed full-screen.
n DOT BY DOT: The image is displayed in its native
resolution size.
0 1919/1920
XGA
H=1, V=1
H=2, V=1
1079
1080
H=1, V=2 H=2, V=2
2159
Input port selection
Window auto-arrangement
Input signal auto-scan
Sampling clock phase adjustment
Analog input gain correction
Input memory save (page 41)
1919/1920 3839
HD
H=2, V=1
H=2, V=2
3899 0 1919/1920
WUXGA UXGA
H=1, V=1
H=2, V=1 H=2, V=1
H=2, V=1
H=1, V=2 H=2, V=2
REV 1.0
3839
37