Cube Stacking - Mitsubishi Electric VS-60HS12U Setup Manual

2 . 3 C u b e s t
2 . 3 C u b e s t
2.3.1 Screen demounting
Unlocking
Release delivery locking before screen demounting /
mounting.
· Shipping lock bolts (in screen integrated models)
remove 2 shipping lock bolts (M5-45mm, white hex
socket bolts).
Shipping lock bolts
This product has no handles, so take out the cabinet
from the carton tray holding the frame of the cabinet
after demounting the screen.
Demounting
1 Pull up the screen handles on both sides to draw the
screen unit till locked and put the handles back to
the original positions.
Screen-drawing
handles
(1)
(2)
Carton tray
14
VS-60HS12U Set-up Manual
a c k i n g
a c k i n g
2 While pressing the release buttons on both sides to
the end, open the lower part of the screen (about
15°) to pull it up on the skew.
(2)
(1)
Release button
(on both sides)
15°
3 Put back the screen-holding arms into the cabinet by
pressing down the slide lock lever on both sides.
Slide lock lever
(on both sides)
Screen-holding arm