Maintenance; Error Indication; On-Screen Indicator; Status Indicator - Mitsubishi Electric VS-60HS12U Setup Manual

4 M a i n t e n a
4 M a i n t e n a
TOP
SYSTEM SETTING

MAINTENANCE

LED TIMER RESET
MAX. TEMPERATURE RESET
MISC. 2
MEMORY INITIALIZE
4 . 1 E r r o r i n d i c a
4 . 1 E r r o r i n d i c a
The monitors indicates current status to users with both "on-screen indicator" which lights in blue on screen and the
"status indicator" on the control panel.

4.1.1 On-screen indicator

A blue light lights on screen in standby state. It blinks indicating a failure ("Error
indicaiton": page 47).
· [ESC] button can temporarily hide the light. This hidden setting is effective until the
main power is switched off. [DISPLAY] button restores the indication.
· The status indicator on the control panel shows the detailed information.
· The light can be inhibited in SCREEN INDICATION menu (page 35).

4.1.2 Status indicator

Status indication
The current status is displayed in 7 segment LED on the control panel when a monitor status changes.
Indication
. (Dot)
#
L <-> #
. (Dot) blinking
Error indicaiton
Indication
L <-> #.
F <-> #.
P <-> #.
C <-> 1.
C <-> 2.
C <-> 3.
C <-> 4.
H <-> #.
· Ignore error indications that appear briefly. The real error shows continuously.
· An error may detect a secondary failure and may not indicate the primary cause.
n c e
n c e
Light source operating time reset
Internal temperature peak value reset
Factory default restoring
t i o n
t i o n
Status
Standby state
Starting-up process
Normal mode
Normal mode
LED Emergency mode
Shutting-down process
Error
LED light source error
FAN stop
Power error
FORMATTER ASIC ERROR
IIC ERROR Stand by
IIC ERROR Main
IIC ERROR OPT
Temperature abnormality
Status indicator
Standby switch
Description
# : counting up according to the process
Non-display : Window1 is active signal
Upper - : Window 1 no signal
Indicate non-lighting LED in normal modes.
# see error indication "LED ERROR"
Description
# : non-lighting LED
1:R LED
2:G LED
4:B LED
3:R G LED
5:R B LED
6:G B LED
7:R G B LED
# : defective position
# : defective position
I2C bus lock
I2C bus lock
I2C bus lock
# : defective position
47
REV 1.0