Menus - Mitsubishi Electric VS-60HS12U Setup Manual

1.3.3 Menus

Basic menu operations
· The up/down arrow buttons on the remote control
move the yellow cursor to select menus.
· In a menu with ">" mark on the right, [ENTER] button
shows its lower layer menu. [ESC] button restores the
original upper menu.
· In a menu with an enter mark on the right, [ENTER]
button confirms or executes the menu.
· The left/right arrow buttons change the value in a
menu with left/right triangle marks.
· When values are changed in a menu,
appears. Save the change according to the necessity.
- In WINDOW PRIORITY menu, the mark appears
when an input memory in any of the windows is
changed.
- In INPUT MEMORY menu, the mark appears when
an input memory in the top window is changed.
· In the menu displaying, [MENU1] button changes the
menu GUI to the simple one. The image area behind
the menu can be observed widely. Re-pressing the
same button restores the original menu.
[MENU1] button
· Menus are not displayed when the monitors are
controlled by Wallaby.
TOP menu
The TOP menu is displayed by [MENU1] button on the
remote control in advanced mode. Starting from the
top menu, any lower menus can be choosen.
· Allocated short-cut buttons also allow you to access
each menu directly, not-through the TOP menu.
INFORMATION menu
It shows various status information on screen.
Short-cut: [DISPLAY] button
Shows the input terminal and input signal
is active or not.
mark
9
REV 1.0