Required Tools; Parts List - Nautilus Inspiration 4-Station Owner's Manual

INSTALLATION

Required Tools:

• #2 Phillips Screwdriver
• 4mm Allen Key
• 5mm Allen Key
• 6mm Allen Key
• 8mm Allen Key
• 16mm Socket
• Ratchet Wrench
• 16mm Open-Ended Wrench
• 13mm Open-Ended Wrench
• 10mm Open-Ended Wrench

Parts List

SKU Description
731-3186 SCREW,M3.5 X 13,SELF TAPPING
731-3185 CAP,MS TOWER
731-3164-XX WELD,PLACARD,MS
731-1194 SCREW,M6 x 1.0,16mm,FHM,HK
731-7349 PLACARD,LOW ROW, NAU
731-4439 STICKER,ADD ON, MULTI STATION
731-3641 ASSY,WGT STK,130kG,MS
731-3622-XX WELD,LOW ROW
110-3783 SCREW,M10x1.5,140mm,HHC,HE,AS,ZC,GR12.9
731-0363 NUT,M10X1.5,NYLOC
731-0367 WASHER,PLAIN,M10
731-3221 BRKT,MOUNT,DOUBLER,MS
731-5516 SCREW,M10x1.5,75mm,HHC,HE,AS,12.9,ZC
731-3178 BRACKET, CONNECTOR, 76.2MM
110-3814 SCREW,M10x1.5,30MM,HHC,HE,AS,12.9,ZC
731-3646 ASSY,CABLE,LR
731-3204 ASSY,WGT STK,100kG,TP
731-7350 PLACARD,TRICEPS PRESS, NAU
731-3203-XX WELD,BACK REST,TP
731-7525-XX WELD,LAT PULL,UPPER
731-3641 ASSY,WGT STK,130kG,MS
731-7351 PLACARD,LAT PULL, NAU
731-3648-XX WELD,LAT PULL,LOWER
731-3142 ASSY,WGT STK,100kG,CC
731-7348 PLACARD,CABLE CROSS, NAU
731-8118 STICKER,INSTRUCTIONS,TROLLEY
731-3194 WELD, BALET BAR, RIGHT, BLACK
731-3174 BRKT, BALET BAR MNT
731-3199 WELD, BALET BAR, LEFT, BLACK
731-3223 SCREW,M10 X 1.5,140MM,BHC,HK, CS, NP
731-3157-XX WELD,POST MOUNT,LOW
731-2448 SCREW,M10x1.5,16MM,BHC,HK,AS,GR-12.9,NKL
731-3188-XX WELD,UPPER SUPPORT,CC
731-3161 SCREW,M12 X 1.75,25mm,FHM,HK,AS,GR-10.9,NKL
731-0165 CAP,PLASTIC,PULLEY,Ø120mm
110-3883 SCREW,M10x1.5,55MM,HHC,HE,AS,12.9,ZC
731-0731 ASSY,PULLEY,Ø120MM,CABLE
731-3157-XX WELD,POST MOUNT,LOW
731-1878 WELD,ADJ. GUIDE TUBE, DAP
731-2448 SCREW,M10x1.5,16MM,BHC,HK,AS,GR-12.9,NKL
731-0365 NUT,M8 X 1.25,NYLOC JAM
731-0209 CAP, END, 110 X 50
Page 7