Typical Cleaning Tasks - Nilfisk-Advance SH TRUCK Instructions For Use Manual

5.7 Typical cleaning tasks

5.7.1 Vehicle
Task Accessories
Machinery Detergent injection
Tractors Powerspeed lances
Ploughs etc. Curved lances and un-
derchassis washers
Brushes
Vehicle body- Standard lance
work Detergent injection
Curved lances and un-
derchassis washers
Brushes
Detergents
Active Shampoo
Active Foam
Sapphire
Super Plus
Active Wax
Allosil
RimTop
Original Instructions
Method
1. Apply detergent to vehicle or equipment surfaces
in order to soften up dirt and grime. Apply from
bottom to top.
2. Proceed with cleaning using the high-pressure
lance. Clean again from bottom to top. Use acces-
sories to clean in diffi cult to reach places.
3. Clean fragile areas such as motors, rubber at
lower pressure levels to avoid damage.
1. Apply detergent to vehicle or equipment surfaces
in order to soften up dirt and grime. Apply from
bottom to top. In cases of particularly dirty ve-
hicles, pre-spray with a product such as Allosil in
order to remove traces of insects etc, then rinse
at low pressure and apply normal car cleaning
detergent. Let detergents settle for 5 minutes be-
fore cleaning off. Metallic surfaces can be cleaned
using RimTop.
2. Proceed with cleaning using the high-pressure
lance. Clean again from bottom to top. Use ac-
cessories to clean in diffi cult to reach places. Use
brushes in order to add a mechanical cleaning ef-
fect. Short lances can help for cleaning of motors
and wheel arches. Curved lances or under-car-
riage washers can be valuable for the cleaning of
car under-chassis and wheel arches.
3. Clean fragile areas such as motors, rubber at
lower pressure levels to avoid damage.
4. Apply a liquid wax using the pressure washer in
order to protect the bodywork from pollution.
SH TRUCK
21