Nilfisk-Advance SH TRUCK Instructions For Use Manual page 12

SH TRUCK
4.1.3 Spray handle - acces-
sories
4.1.4 Selection of spray
lance
12
Pipeline, max. length:
Ø12 x 1,5 - max.
Ø15 x 1,5 - max.
Ø18 x 1,5 - max.
When using max. pipe lengths, only use a high-pressure hose of 10
m.
A
B
You may use a double spray
lance as well as a single spray
lance with the machine.The
recommended nozzle size of
the lance is printed on the data
plate of the machine – i.e. 0550.
The max. pressure of the ma-
chine can be reduced by using
nozzles with a wider diameter.
Never use lances with smaller
nozzles (nominal value /
diameter) than stated on the
data plate.
50 m
180 m
500 m
1. Pull the blue quick-release
grip (A) of the spray handle
backwards.
2. Insert the nipple of the spray
lance (B) into the quick-
release connection and
release it.
3. Pull forward the spray lance
or any other accessory to
ensure correct mounting
before starting the machine.
NOTE!
Clean nipple of
any impurities
each time the spray lance has
been dismounted.
Original Instructions