Nilfisk-Advance SH TRUCK Instructions For Use Manual page 17

4.2.6 Automatic "system
shut-down"
4.2.7 Frost protection, inter-
nal
4.2.8 Frost protection, exter-
nal (Option, not stand-
ard)
Original Instructions
Your SH TRUCK features a
function called "system shut-
down" that can be enabled by
your Nilfi sk service technician
during installation or at a later
time.
When enabled, "system shut-
down" will automatically switch
The machine has been con-
structed for outdoor placement.
The machine features a fan
This option ensures that hose,
handle and spray lance does
not freeze. After use the spray
lance must be placed in the
spray lance holder (pos. 15).
Then turn off the machine on
the front panel.
If the temperature is below the
temperature set on the thermal
sensor in the electric box, the
OFF the SH TRUCK when it
has not been used for a prede-
fi ned time (from 1 sec. up to 9
hours) at your choice.
Shut-down is disabled on deliv-
ery - please contact your Nilfi sk
service representative if you
would like the function(s) to be
enabled.
heater automatically starting up
when the temperature inside
the machine gets too low.
The adjustment of the thermal
sensor is effected in the electric
box. On delivery the adjustment
has been set at 5°C. This set-
ting must not be lowered.
NB: The frost protection does
NOT function if the machine
has been turned off on the
main switch.
IMPORTANT: For safety rea-
sons, hoses, spray lances
and other accessories should
always be thawed prior to use.
frost protection will start. Water
will now circulate through hose,
handle, spray lance and back to
the machine.
IMPORTANT: The
frost protection is
not active, when
the machine has
been switched on (ready for
operation).
SH TRUCK
17