Operation - Nilfisk-Advance SH TRUCK Instructions For Use Manual

SH TRUCK
4.1.6 Application of deter-
gents (internal)
4.2

Operation

4.2.1 Starting up
4
14
If you want to apply a detergent,
do as follows:
B
A
3
+ +
9
1. Fill a detergent into a 25 l
container.
2. Turn the machine on, push
the button for addition of
detergents (9) and lay out
detergent.
The concentration of deter-
gent can be adjusted on the
detergent pump.
3. Turn off the addition of
detergent by pushing the
button (9).
NB: The PH value of the
detergent should be between
5.8 – 8.5%. If you want to ap-
ply a detergent
with another PH
value, an external
injector should be
used (see section
4.1.5).
The shut-off cock on the water
inlet should be open, and the
spray handle on the high-pres-
sure hose should be closed.
1. Turn the main switch (2) to
position - ON -.
2. Push the green "START"
push button (3).
Check on the pressure gauge
(6) that a pressure is being built
up in the system and that the
motor of the SH TRUCK stops
within c 20 seconds with the
green "START" push button (3)
lit. The SH TRUCK is now in
"Stand-by" mode waiting for the
operator to activate the spray
handle.
If a pressure is not being built
up, vent the machine as de-
scribed in sections 3.7 - 3.8
Venting.
Original Instructions