Fields Of Application And Working Methods; Fields Of Application; Working Pressure; Temperature - Nilfisk-Advance SH TRUCK Instructions For Use Manual

SH TRUCK
5 Fields of Application and Working
Methods

5.1 Fields of application

5.2 Working pressure

5.3 Temperature

5.4 Mechanical impact

18
The most important fi elds of application for this product are:
Transport Cleaning of trucks, buses, cars etc.
Building & Cleaning of vehicles, equipment, buildings etc.
Construction
Light industry Degreasing and cleaning of machines, workpieces, and
vehicles.
Service Cleaning of vehicles, public baths, institutions etc.
The high-pressure system may be used with high or low pressure
at your own option:
Low pressure Is fi rst and foremost used for the application of detergents
and for fl ushing.
High-pressure Is used during the actual cleaning.
Intermediate As an example it may be used for the cleaning of surfaces
pressure which cannnot stand a too powerful jet, i.e. soft surfaces.
Hot water signifi cantly
increases the effi ciency of the
cleaning process – especially
grease, oils and fats can be
broken down more easily at
higher temperatures.
Temperatures up to 60°C
should clean off proteins, such
as blood substances.
In order to break down tough
layers of dirt, additional me-
chanical impact may be
required. Special lances with
special nozzles (pulsating jet /
Oil and traffi c fi lm should be
exposed to app. 70°C, whereas
grease and fat is easiest to
remove with temperatures of 80
to 85°C.
Several detergents become
more effi cient when acting with
hot water – please refer to
manufacturers recommenda-
tions.
concentrated "0" jet) are avail-
able for such purposes as are
rotating brushes plus soft &
sand blasting equipment.
Please ask your Nilfi sk repre-
sentative.
Original Instructions