About The Bluetooth Device - Philips CID2780/00 User Manual

‡ Disc rating exceeds the restriction setting.
Change the rating settings to lower one.
‡ Disc region code is not compatible with
the unit. Use disc with proper region code.
&DQ·W SOD\ 'LY; ÀOH IURP 6' RU 86%
‡ This device doesn't support DivX playback
in SD or USB mode.
No image
‡ Parking wire connection is incorrect. Check
the wiring.
No image on rear display
‡ Check if you are playing DivX video. If
yes, it's normal, for this device does not
support video out in DivX playing mode.
,PDJH ÁDVKHV RU GLVWRUWHG
‡ Video DVD settings do not match with the
DVD. Adjust video DVD settings.
‡ Video connection is improper. Check the
connections.
Noise in broadcasts.
‡ Signals are too weak. Select other stations
with stronger signals.
‡ Check the connection of the car antenna.
‡ Change broadcast from stereo to mono.
Preset stations lost.
‡ Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
Fuse is broken
‡ The fuse type is incorrect. Replace it with
a 15A fuse.
‡ Speaker wire or power wire is grounded.
Check the connections.
Display show ERR-12
‡ USB/SD/MMC data error. Check the USB
device or SD/MMC card.
34 EN

About the Bluetooth device

Music playback is unavailable on the system
even after successful Bluetooth connection.
‡ The device cannot be used with the
system to play music.
The audio quality is poor after connection
with a Bluetooth-enabled device.
‡ The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
Cannot connect with the system.
‡ 7KH GHYLFH GRHV QRW VXSSRUW WKH SURÀOHV
required for the system.
‡ The Bluetooth function of the device is
not enabled. Refer to the user manual of
WKH GHYLFH WR ÀQG RXW KRZ WR HQDEOH WKH
function.
‡ The system is not in the pairing mode.
‡ The system is already connected with
another Bluetooth-enabled device.
Disconnect that device or all other
connected devices and then try again.
The paired mobile phone connects and
disconnects constantly.
‡ The Bluetooth reception is poor. Move
the mobile phone closer to the system or
remove any obstacle between the mobile
phone and the system.
‡ Some mobile phones may connect and
disconnect constantly when you make
or end calls. This does not indicate any
malfunction of the system.
‡ For some mobile phones, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the system.