Play From Rear Displays; Listen To Other Devices; Reset - Philips CID2780/00 User Manual

Philips car entertainment system cid2780
Hide thumbs Also See for CID2780/00:
Table of Contents

Advertisement

3
Tap
or
to allocate key function.
4
Tap
.
» You are requested to press the
matching button on the steering wheel
for one second.
5
Follow the instructions as shown on the
screen.
6
Repeat steps above to allocate other
buttons.

Play from rear displays

If there is a display installed for passengers
on rear seat, you can select a source for rear
display. That is, passengers are not necessarily to
watch or listen to same source.
1
Make sure that your in-car system is
connected to rear display correctly.
2
While playing, tap
menu.
3
R
Tap
[Rear zone].
» The rear zone options are displayed.
30
EN
>
to display full
4
Tap on a source.
» The selected source plays after a
few seconds. The passengers can use
headphones for listening.

Listen to other devices

You can connect an external audio/video device
to the car audio system.
1
Connect the car audio to the device with
the supplied AV cable.
AV IN
2
Tap
to display the main menu.
3
Tap
[AV-IN1].
4
Operate the connected the device (see
the device's instructions manual).
Tip
If you connect the system to other audio devices
through the REAR OUT L/R connector (see "Wiring
Diagram" section), tap [AV-IN2] to listen to that device.

Reset

When the unit hangs up, you can reset it.
1
Press RESET with a ball-point pen or
similar tool.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cid2780

Table of Contents