1000Base-Lx Sfp Specifications; 1000Base-Xd Cwdm Sfp Specifications - Avaya Ethernet Switch 5000 Series Manual

SFP specifications

1000BASE-LX SFP specifications

The 1000BASE-LX SFP provides 1000BASE-LX gigabit Ethernet connectivity at 1310
nanometers (nm) using single mode or multimode optical fiber. The 1000BASE-LX SFP
supports full-duplex operation only. The part number for this model is AA1419015-E5.
The following table describes standards, connectors, cabling, and distance for the 1000BASE-
LX SFP.
Table 11: IEEE 802.3z 1000BASE-LX SFP specifications
Connectors
Cabling
Distance
Wavelength
Link optical power budget
Transmitter characteristics
Launch power
Receiver characteristics
Receiver sensitivity
Maximum input power

1000BASE-XD CWDM SFP specifications

The 1000BASE-XD SFPs provides CWDM gigabit Ethernet connectivity using single mode
fiber. These SFPs support full-duplex operation only. The part numbers of the 40 km models
range from AA1419025-E5 to AA1419032-E5.
Important:
For the 40 km CWDM SFPs, a minimum attenuation of 4 dB must be present between the
transmitter and receiver. To avoid receiver saturation, you must insert a minimum
38 Installing Transceivers and Optical Components on Avaya Ethernet Switch 5000 Series
Parameter
Comments? infodev@avaya.com
Specifications
Duplex LC
• 50 micrometer (µm) multimode fiber (MMF)
• 62.5 µm multimode fiber
• 9 µm single mode fiber (SMF)
• Up to 550 meters (m) using MMF
• Up to 10 kilometers (km) using SMF
1310 nm
10.5 dB
– 9.5 to – 3.0 dBm
– 20 dBm
– 3.0 dBm
December 2013