Blanco BCGC74 Use, Installation And Maintenance Instructions
  1. Manuals
  2. Brands
  3. Blanco Manuals
  4. Cooktop
  5. BCGC74 - BCGC52
  6. Use, installation and maintenance instructions
Blanco BCGC74 Use, Installation And Maintenance Instructions

Blanco BCGC74 Use, Installation And Maintenance Instructions

60 cm, 4 burner crystal glass cooktop
Hide thumbs Also See for BCGC74:
Table of Contents

Advertisement

Quick Links

See also: Use and Installation Instructions
USE, INSTALLATION AND MAINTENANCE
INSTRUCTIONS FOR BUILT-IN HOT PLATES
Dear Customer
Thank you for purchasing a Blanco Cooktop.
Before we continue telling you about this cooktop, we cordially invite you to become part of the Blanco family by
subscribing to ongoing information and invitations. Please visit our website where you can subscribe and request
such things as invitations to future cooking classes and gourmet recipes. Go to www.meaappliances.com.au and
fill in the subscription details.
You will find that the clean lines and modern look of your Blanco Cooktop blends perfectly with your kitchen décor.
It is easy to use and performs to a high standard.
Blanco also makes a range of products that will enhance your kitchen such as ovens, rangehoods, dishwashers,
microwaves, sinks and taps.
There are models to complement your new Blanco Cooktop.
Of course we make every effort to ensure that our products meet all your requirements, and our Customer
Relations department is at your disposal, to answer your questions and to listen to all your suggestions (see back
cover of manual).
Please complete the warranty section of this manual and keep your receipt as proof of purchase. Retain all
documents relating to the purchase of this products.
Blanco is committed to providing increasingly efficient products that are easy to use, respect the environment and
are attractive and reliable.
BLANCO
We ask that you carefully read the instructions within this booklet to enable you to abtain quality results from the outset.
The appliance must be installed only by an authorised person in compliance with the instructions provided. The manufacturer
declines all responsability for improper installation which may harm persons and animals and damage property.
The appliance must be used for the purpose for which it was expressly designed. Any other use (eg heating rooms) is considered to
be improper and consequently dangerous. The manufacturer declines all responsability for damage resulting from improper and
irresponsible use.
The manufacturer shall not be held responsible for any inaccuracies in this handbook due to printing or transcription errors. The
designs in the figures are purely indicative.
The manufacturer also reserves the right to make any modifications to the products as may be considered necessary, useful or in
the interests of the user, without jeopardizing the main functional and safety features on the products themselves.
If your cooktop requires service, please contact your local customer service centre or your nearest Blanco agent listed at the back of
this booklet.
MODEL: BCGC74
60 CM, 4 BURNER
CRYSTAL GLASS COOKTOP
COD. 01019GG - 26.07.2004

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BCGC74 and is the answer not in the manual?

Questions and answers

Related Manuals for Blanco BCGC74

Summary of Contents for Blanco BCGC74

  • Page 1 If your cooktop requires service, please contact your local customer service centre or your nearest Blanco agent listed at the back of this booklet.
  • Page 2 DESCRIPTION OF THE HOT PLATES Natural U-LPG 1 Ultra rapid gas burner of 11.9 MJ 11.9 MJ 2 Semirapid gas burner of 6.3 MJ 6.3 MJ 3 Auxiliary gas burner of 3.6 MJ 3.6 MJ 4 Cast iron trivet 1 burner 5 Cast iron trivet 2 burner 6 Cast iron trivet 3 burner 7 Burner control knobs...
  • Page 3 HOW TO USE THE BURNERS 1) BURNERS In order to achieve maximum efficiency with the least A diagram is screen-printed above each knob on the possible gas consumption: front panel. This diagram indicates to which burner - Use adequate pans for each burner (consult the the knob in question corresponds.
  • Page 4 Notes: Use of a gas cooking appliance produces heat and moisture in the room in which it is installed. The room must therefore be well ventilated by keeping the natural air vents clear (fig. 3) and by activating the mechanical aeration device (rangehood or electric fan fig. 4 and fig. 5). Intensive and lengthy use of the appliance may require additional ventilation.
  • Page 5 CLEANING IMPORTANT: established by the rounded corners, which Always disconnect the appliance from the gas should be set towards the side edge of the hot and electricity mains before carrying out any plate. cleaning operation. - Do not force the taps if they are difficult to open or close.

  • Page 6: Installation

    INSTALLATION mm above the construction above the top of the TECHNICAL INFORMATION FOR THE INSTALLER burner and no construction shall be within 450 mm above the top of the burner. A minimum depth of 60 This appliance shall be installed only by authorised mm from the top of the work surface must be personnel and in accordance with the manufacturer’s provided for this appliance.

  • Page 7: Location And Ventilation

    INSTALLATION Natural Gas 5) LOCATION AND VENTILATION Natural Gas installations require the connection of a gas Ventilation must accordance with regulator at the appliance. This regulator is supplied with AS5601/AG 601 – Gas Installations. the appliance on purchase. In general, the appliance should have adequate ventilation for Assemble the regulator (noting the gas flow direction) and complete combustion of gas, proper flueing and to maintain transition pieces (supplied with the appliance), in...

  • Page 8: Electrical Connection

    INSTALLATION THE APPLIANCE MUST BE EARTHED 7) ELECTRICAL CONNECTION Ensure that this power point is properly earthed. The appliance is supplied with a 1800 mm long Look at the connection wiring diagrams flexible supply lead. (fig. 12). The point of attachment for this lead is located at the rear and on the underside of the appliance 380 mm from the right hand side.
  • Page 9 ADJUSTMENTS Always disconnect the appliance from the 8) TAPS electricity main before making any adjustments. Our taps are suitable for all gas, they are male conical All seals must be replaced by the technician at type. the end of any adjustments or regulations. Our burners do not require primary air “Reduced rate”...
  • Page 10 Appliance models: Gas crystal glass hotplate Appliance models: Gas crystal glass hotplate models: models: BCGC74 4 Burners BCGC74 4 Burners 1. Remove each burner cap and burner skirt. 1. Remove each burner cap and burner skirt. 2. Remove the U-LPG main injector with a 2.
  • Page 11 CONVERSIONS BURNER ARRANGEMENT ON THE HOT PLATE TABLE NORMAL INJECTOR NOMINAL HEAT BURNERS PRESSURE DIAMETER INPUT (MJ/h) N° DESCRIPTION (kPa) (1/100 mm) MAX. U-LPG 2.75 11.9 ULTRA RAPID NATURAL 1.00 11.9 U-LPG 2.75 SEMIRAPID NATURAL 1.00 U-LPG 2.75 AUXILIARY NATURAL 1.00 FIG.

  • Page 12: Components Replacement

    SERVICING WARNING: Greasing the taps (see fig. 19 - 20) Always disconnect the appliance from the If a tap becomes stiff to operate, it must be electricity and gas mains before proceeding immediately greased in compliance with the with any servicing operation. following instructions: Servicing should be carried out only by - Remove the tap.
  • Page 13 SERVICING CABLE TYPES AND SECTIONS TYPE OF TYPE OF SINGLE - PHASE HOT PLATE CABLE POWER SUPPLY Gas hot plate H05 RR - F Section 3 X 0.75 mm ATTENTION!!! If the power supply cable is replaced, the installer should leave the ground wire longer than the phase conductors (fig.

This manual is also suitable for:

Bcgc74w

Table of Contents