Sending A Dsc Call; Receiving A Call - Simrad SimNet Installation & Use Manual

DVHF RADIO SYSTEM - RS82

Sending a DSC call

DSC functions are only available with an accepted MMSI number in the radio.
U
S
E

Receiving a call

32
Enter the call function.
Enter the MMSI number of the station manually using the nu-
meric keypad, or scroll through the MMSI number directory.
Confi rm selection.
Enter required reply channel and confi rm with OK.
The display will show "PRESS OK TO SEND"
- press OK to initiate the call, or ON/C to abort.
If an individual routine call is received, the radio will
sound an incoming call alarm.
The display will fl ash between displaying "CALL
FROM", the caller's MMSI number and the specifi ed
working channel.
If the caller's MMSI is stored in the MMSI directory,
the display will show the name stored instead of the
MMSI
Press OK to accept the call, or ON/C to reject it.
If the call has been accepted, the display will show "SEND
ACKNOWLEDG". Press OK to send a call acknowledgement
and automatically switch to the specifi ed working channel.