12. From the Input Data pull-down menu, choose the appropriate method for
the output module, None.
Choose
None
13. From the Output Data pull-down menu, choose the appropriate method
for the output module from the following options.
Choose
Safety
None
14. From the Input Status pull-down menu, choose the appropriate method
for the output module from the following options:
Choose
None
Pt. Status
Rockwell Automation Publication 1734-UM013C-EN-P - August 2010
Configure the Module in a GuardLogix Controller
Description
This is an output-only safety module. None is the only
valid selection.
Description
Automatically selected when Configured By = This
controller. Results in an output connection. Selecting
Safety creates output tags and enables these outputs for
use in the Safety Task.
Automatically selected when Configured By = External.
Selecting None results in an input only connection to the
module. Status is read, but no outputs are written.
Description
There are no status tags, only data for the outputs.
There is one status tag for each output point.
Chapter 6
81