Sharp BP-10C20 Quick Start Manual page 36

SYSTEM SETTINGS
Press the [OK] key and follow the instructions in the setting screen.
5
Several settings will have checkboxes in front of them. To enable a function (make a checkmark appear),
press the [OK] key. To disable the setting, press the [OK] once again to remove the checkmark. To
configure a setting that has a checkbox, go to step 6.
To use another setting for the same mode, select the desired setting with the
6
[ ] or [ ] key.
To use a setting for a different mode, press the [BACK] key (
settings, press the [CA] key.
WHAT YOU CAN DO IN THE SYSTEM SETTINGS
The following settings can be configured in system settings.
Some settings may not appear on the display of the machine, or in the Web browser on your computer. Some settings
may not appear due to the specifications of your machine and the peripheral devices that are installed.
Menu
System Settings
36
Configure the main settings for the machine such as date settings and paper tray settings. You
can configure the following settings.
Change Admin PIN
Initial Setting
Copier
Printer
Scanner
Fax
Network
User Control
Device Control
Operation Setting
Energy Save
List Print
Auto Calibration
Security Settings
) and select the desired mode. To exit the system
Overview
Use this function to change administrator PIN code.
The default settings for operation of the machine can be
configured.
You can select copy settings.
You can select print settings.
You can select scanner settings.
You can select fax settings.
You can select network settings.
User Control is used to configure settings for user
authentication.
These settings are used to configure settings for hardware
functions of the machine.
These settings are used to configure various settings related to
the operation panel.
These settings are used to configure energy saving settings.
This is used to print lists and reports that are only for use by the
administrator of the machine.
By scanning the printed test pattern, tones can be
automatically corrected.
The following settings are related to security.