Alarms And Indicators - Arjohuntleigh Alpha Active 3 Instructions For Use Manual

Alarms and Indicators

Low Pressure Indicator
The Low Pressure alarm is inactive for the first 30 minutes of the pump being
switched on.
See Page 16 "Troubleshooting and Alarm Conditions" for possible causes
of Low Pressure.
Service Indicator/Pump Fault
Power Fail Indicator
If the operation of the pump changes during use, refer to
Page 16 "Troubleshooting and Alarm Conditions" of this IFU before
calling a service engineer or contacting your local ArjoHuntleigh sales
office.
The
Low Pressure
pump detects low pressure within the mattress overlay.
An audible alarm will sound unless cancelled by the
button.
mute
The indicator will extinguish once normal pressure is
reached.
The
Service/pump fault
audible alarm will sound and remain on if the pump has
detected an internal fault. A Service Engineer should be
called.
The indicator will illuminate when a mains
Power Fail
power failure has been detected. An audible alarm will
sound until power is resumed or the pump is switched
off using the on/off button.
8
indicator is illuminated whenever the
indicator will illuminate, an