Controls, Alarms And Indicators; Controls - Arjohuntleigh Alpha Active 3 Instructions For Use Manual

4. Controls, Alarms and Indicators

Controls

On/Off
Pressing the button will activate the pump.The
On/Off Button
pump will perform a self test during which all LEDs will
illuminate, and audible beeps will sound.
During an alarm condition the sound of the alarm can be
Alarm Mute
muted by pressing this button. The muted state can also
be terminated manually by pressing this button again.
The mode selector allows the mode of operation to be
Mode Selector
selected.
Two modes of operation are available, Alternating or
Static (non-alternating). The indicator next to the
respective icon indicates the currently selected mode.
This is a rotary action control used to manually set the
Pressure Control
pressure inside the mattress overlay and therefore the
amount of support the patient receives.
7