Configuring Captive Portals; Configuring Radius - Avaya WLAN 8100 Series Quick Start Manual

WMS workflows
5. Using the fields provided, associate the mobility VLANs with local VLANs.
6. Click Update.

Configuring captive portals

The following procedure is used to configure captive portals.
1. Log into WMS.
2. Select Mobility Domains, <Domain Name>, Policy, Captive Portal.
3. Select General Settings from the menu.
4. Click Edit.
5. Use the fields provided, configure the global captive portal settings.
6. Click Update.
7. Select Profiles from the menu.
8. Click Add to create a new profile or Edit to edit an existing one.
9. Using the fields provided, configure the profile settings.
10. Click Update.
11. Select Mobility Domains, <Domain Name>, Policy, Mobility Profiles.
12. Click Add.
13. Enter the name of the mobility VLAN in the field provided.
14. Click Add.
15. Create a new network profile for captive clients.
16. Add the new network profile to an existing AP profile on the Networks tab.
17. Apply the new policy settings to the controller.
18. Create a new VLAN mapping for the captive portal settings.

Configuring RADIUS

The following procedure is used to configure RADIUS settings.
16 Avaya WLAN 8100 Quick Start Guide August 20, 2010