Chapter 7: Avaya Sbce Configuration; Configuring An Ems Plus Sbce Deployment - Avaya Session Border Controller for Enterprise Manual

Chapter 7: Avaya SBCE configuration

Depending on the deployment option, perform the appropriate configuration procedure:
• Single server:
- Configuring EMS and SBC on a single server
• Multiple server:
- Configuring EMS
- Configuring Avaya SBCE
For multiple server configuration, the sequence must be:
1. Primary EMS
2. Secondary EMS
3. Avaya SBCE servers in any order

Configuring an EMS plus SBCE deployment

About this task
After installation, the EMS plus SBCE deployment cannot use EMS for other SBCE devices in the
network.
Procedure
1. Connect to the system using the same mode that was used for software installation. For
preinstalled servers, use the serial mode.
2. Turn on the system.
3. Wait for the configuration menu to appear.
The options are:
• 1-configure: Command line mode
• 2-configure: Text mode
• 3-Reboot SBCE
• 4-Shutdown SBCE
4. Select option 2 for text mode.
August 2015
on page 59
on page 62
Comments on this document? infodev@avaya.com
on page 57
Deploying Avaya SBCE
57