FLORABEST FKGW 56 A1 Operating Instructions Manual

FLORABEST FKGW 56 A1 Operating Instructions Manual

Round barbecue
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

KUGELGRILLWAGEN FKGW 56 A1
KUGELGRILLWAGEN
Bedienungsanleitung
IAN 85798
ROUND BARBECUE
Operating instructions

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for FLORABEST FKGW 56 A1

  • Page 1 KUGELGRILLWAGEN FKGW 56 A1 ROUND BARBECUE KUGELGRILLWAGEN Operating instructions Bedienungsanleitung IAN 85798...
  • Page 2 Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen Funktionen des Gerätes vertraut. Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. DE / AT / CH Bedienungsanleitung Seite Operating instructions...
  • Page 4: Table Of Contents

    Importeur ................12 FKGW 56 A1...
  • Page 5: Einführung

    7. Lassen Sie den Grill vor der Reinigung vollständig abkühlen. 8. Verwenden Sie niemals Wasser zum Löschen der Holzkohle. WARNUNG Warnung vor Erstickung! Verwenden Sie den Grill nur im Freien! ► Betreiben Sie den Grill nicht in geschlossenen Räumen, oder auf überdachten Flächen. ► FKGW 56 A1...
  • Page 6: Lieferumfang

    Ø6x18 Ø6x30 Ø5 HINWEIS Prüfen Sie die Lieferung auf Vollständigkeit und auf sichtbare Schäden. ► Bei einer unvollständigen Lieferung oder Schäden infolge mangelhafter Verpackung oder durch Transport ► wenden Sie sich an die Service-Hotline (siehe Kapitel Service). FKGW 56 A1...
  • Page 7: Montage

    , Federring Ø5 und Mutter M5 Schrauben Sie die oberen Gelenkstücke (mit C + D gekennzeichnet) mittels hitzebeständiger Unter- ♦ legscheibe Ø6 x 18 , Unterlegscheibe Ø6 x 18 und Schraube M6 x 16 an die Haube FKGW 56 A1...
  • Page 8 Sie sie mittels ♦ Schraube M6 x 45 und kurzen Verbindungsstreben fest. Stecken Sie die zwei Radstreben in die zweite Seitentischstrebe und schrauben Sie sie mittels ♦ Schraube M6 x 45 an die kurzen Verbindungsstreben fest. FKGW 56 A1...
  • Page 9 Löcher der Radstreben ♦ Sichern Sie die aufgesetzten Räder mit den selbstsichernden Muttern M10 . Halten Sie ggf. die ♦ Achse mit einer Zange fest. Legen Sie zum Schutz vor Kratzern ein Tuch zwischen Zange und Achse FKGW 56 A1...
  • Page 10 Mutter M6 Schrauben Sie das Hitzeschutzblech und den Handgriff mittels Schraube M6 x 16 und Unterleg- ♦ scheibe Ø6 x 18 an den Ascheauff angbehälter Schieben Sie den Ascheauff angbehälter auf das Verbindungsstück an der Kohleschüssel ♦ FKGW 56 A1...
  • Page 11 Schritt 8 Setzen Sie die Haube auf die Kohleschüssel und befestigen Sie sie mittels Bolzen Ø6 x 30 und ♦ Sicherungssplint Ziehen Sie zum Abschluss der Montage alle Schraubverbindungen fest. ♦ FKGW 56 A1...
  • Page 12 Sie es in die Kohleschüssel ein. ♦ Sie können nun die Handgriff e wieder vom Grillrost lösen, damit diese beim Grillen nicht stören. Stecken Sie den Warmhalterost in die Löcher der Haube und der Kohleschüssel ♦ FKGW 56 A1...
  • Page 13: Inbetriebnahme

    Grillgut abtropfendes Fett oder Marinade in die Wärmequelle gelangt und dort verbrennt. Im Falle von stark fettigem oder mariniertem Grillgut empfi ehlt sich der Einsatz einer Tropfschale aus Aluminium oder emailliertem Stahlblech. Abb. Beispiel für direktes Grillen FKGW 56 A1...
  • Page 14: Indirektes Grillen

    Für die normale Reinigung verwenden Sie ein Spültuch und Wasser mit einem handelsüblichen Spülmittel. Bei stärkeren Verschmutzungen der emaillierten Teile, verwenden Sie einen handelsüblichen Emaille Reiniger. Beachten Sie die Anweisungen des Herstellers des anzuwendenden Reinigungsmittels. Reinigen Sie den Grillrost mit Spülmittel und einem Haushaltsschwamm. FKGW 56 A1...
  • Page 15: Entsorgung

    IAN 85798 Service Österreich Tel.: 0820 201 222 (0,15 EUR/Min.) Importeur E-Mail: kompernass@lidl.at KOMPERNASS GMBH IAN 85798 BURGSTRASSE 21 Service Schweiz Tel.: 0842 665566 (0,08 CHF/Min., Mobilfunk max. 0,40 CHF/Min.) 44867 BOCHUM, DEUTSCHLAND E-Mail: kompernass@lidl.ch www.kompernass.com IAN 85798 FKGW 56 A1...
  • Page 16 Importer ................. 24 FKGW 56 A1...
  • Page 17: Introduction

    7. Allow the grill to cool down completely before cleaning it. 8. NEVER use water to extinguish the glowing charcoal. WARNING Warning in regard to suff ocation! Use the grill ONLY outdoors! ► Do NOT operate the grill in enclosed spaces or roofed-over areas. ► FKGW 56 A1...
  • Page 18: Scope Of Delivery

    NOTE Check the contents for completeness and for signs of visible damage. ► If the contents are not complete, or are damaged due to defective packaging or through transportation, ► contact the Service Hotline (see chapter Service). FKGW 56 A1...
  • Page 19: Assembly

    , washer Ø6 x 12 spring washer Ø5 and nut M5 Screw the upper couplings (marked C + D) to the hood with a heat-resistant washer Ø6 x 18 ♦ washer Ø6 x 18 and screw M6 x 16 FKGW 56 A1...
  • Page 20 ♦ M6 x 45 and the short connecting braces Insert the two wheel braces into the second side table brace and screw in place using screw ♦ M6 x 45 and the short connecting braces FKGW 56 A1...
  • Page 21 ♦ Secure the attached wheels using the self-locking nuts M10 . If necessary, hold the axle with the ♦ pliers. To prevent scratches, place a cloth between the pliers and the axle FKGW 56 A1...
  • Page 22 Screw the heat shield and the handle to the ash catch tray with a screw M6 x 16 ♦ washer Ø6 x 18 Slide the ash catch tray onto the connecting piece of the fi rebowl ♦ FKGW 56 A1...
  • Page 23 Step 8 Place the hood onto the fi rebowl and secure it using bolts Ø6 x 30 and cotter pin ♦ To fi nish the assembly, tighten all screw connections fi rmly. ♦ FKGW 56 A1...
  • Page 24 . You can now remove ♦ the handles from the cooking grill , so that they do not interfere when you are grilling. Place the warming rack into the holes in the hood and fi rebowl ♦ FKGW 56 A1...
  • Page 25: Using The Device

    With direct cooking there is always the possibility that fat or marinade could fall into the heat source from the food items and burn there. If you are cooking extremely fatty or marinated food items, the use of an aluminium or enamelled steel drip tray is recommended. Fig. Example of direct grilling FKGW 56 A1...
  • Page 26: Indirect Grilling

    For normal cleaning, use a cloth and water with standard detergent. For heavy soiling on the enamelled parts, use a standard commercial enamel cleaner. Follow the instructions supplied by the manufacturer of the cleaning agent being employed. Clean the cooking grill with detergent and a household sponge. FKGW 56 A1...
  • Page 27: Disposal

    Repairs made after expiry of the warranty period are chargeable. Service Service Great Britain Tel.: 0871 5000 720 (£ 0.10/Min.) E-Mail: kompernass@lidl.co.uk IAN 85798 Importer KOMPERNASS GMBH BURGSTRASSE 21 44867 BOCHUM, GERMANY www.kompernass.com FKGW 56 A1...
  • Page 28 KOMPERNASS GMBH BURGSTRASSE 21 44867 BOCHUM GERMANY www.kompernass.com Stand der Informationen · Last Information Update: 12 / 2012 · Ident.-No.: FKGW56A1102012-2 IAN 85798...

Table of Contents