Accessories; Load - APRILIA RSV mile Use & Maintenance Book

Do not carry sharp objects in your pockets
that could be dangerous in case of an up-
set, for example, pens or mechanical pen-
cils, etc. Also, make sure that your pas-
sengers follow this recommendation.

ACCESSORIES

The owner of the vehicle is responsible for
the choice, installation and use of any ac-
cessory.
The installation of inappropriate accessories
or the overloading of the vehicle may result
in the instability of the vehicle itself and cau-
se accidents with consequent risk of serious
injuries or even death. Windshields could be
particularly dangerous, as they can break
and injure or cut the rider in case of acci-
dent. In case of doubts with regard to any
accessory you would like to install or any
30
use and maintenance RSV mille
load you would like to carry, previously con-
sult your Local aprilia Dealer.
Avoid installing accessories that cover hor-
ns or lights or that could impair their func-
tions, limit the suspension stroke and the
steering angle, hamper the operation of the
controls and reduce the distance from the
ground and the angle of inclination in turns.
Avoid using accessories that hamper ac-
cess to the controls, since this can prolong
reaction times during an emergency.
Fairings and windshields installed on the
vehicle may produce aerodynamic forces
that will affect the stability of the vehicle du-
ring use, especially at high speeds.
! - !
RSV mille R
Make sure that anything you carry on your
vehicle is securely attached, and cannot
come lose and jam the wheels, forks, etc.
Do not install any electrical accessories,
and do not modify the electrical system of
your vehicle. Anything that could cause an
electrical overload or other fault could cause
the vehicle to suddenly stop, the lights to
dim or quit, or the horn and other safety ac-
cessories not to work. Use only aprilia ge-
nuine accessories.

LOAD

Do not overload your vehicle. Attach lugga-
ge or packages as close as possible to the
center of your vehicle and distribute the
load from side to side as evenly as possi-
ble, to keep imbalance to a minimum. Re-
member that loads tend to loosen with ri-
ding, so frequently check the security of
your load.