Kuryakyn Pakmaster 444168 Quick Start Manual

PAKMASTER RAIN COVER

PARTS INCLUDED

1 Rain Cover
1 Installation Instructions
Please read and understand entire instructions before starting installation.
THANK YOU FOR CHOOSING K
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR
PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL
INSTRUCTIONS, WARNINGS, CAUTIONS AND ATTENTION NOTES REGARDING
THE USE AND CARE OF THIS PRODUCT.
WARNING! THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING
THE CONTENTS DESCRIBED HEREIN CAN RESULT IN
POTENTIAL DEATH OR SERIOUS INJURY
Attention!
This indication alerts you to the fact that ignoring the contents
described herein may negatively affect product performance and
functionality.

TOOLS SUGGESTED

None needed
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE
PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.

STEP 1

Read and understand all steps in the instructions before starting the
installation. Park the motorcycle on a hard, level surface and turn off the
ignition.

STEP 2

The Pakmaster should be off the bike for ease of installing the rain cover.
NOTE: The handle of the bag faces towards the front of the
bike

STEP 3

Make sure the rear straps and
hooks are snapped on the correct
snap before proceeding to STEP 4.
Top snap for use with no luggage
rack, Bottom snap for use with
a luggage rack.
PIC 1
-cont.-
444168-31HD-1010
PART# 444168
ϋ
RYAKYN!
PIC 1
WITHOUT RACK
WITH RACK