Important Instructions; Safety Instructions - Epson PM-401 Operation Manual

PM-401 Operation Guide

Important Instructions

Safety Instructions

Important Instructions
Use only the AC adapter supplied with the product and do not use the adapter with any other
equipment. Use of any other adapter with this product or the use of the supplied AC adapter with
other equipment may result in fire or electric shock.
Be sure your AC power cord meets the relevant local safety standard.
Never disassemble, modify, or attempt to repair the AC adapter, plug, printer unit or options by
yourself, except as specifically explained in the product's guides.
Unplug the product and the AC adapter, and refer servicing to qualified service personnel under
the following conditions:
The AC adapter or plug is damaged; liquid has entered the product or the AC adapter; the product
or the AC adapter has been dropped or the casing damaged; the product or the AC adapter does
not operate normally or exhibits a distinct change in performance. Do not adjust controls that are
not covered by the operating instructions.
Place the product near a wall outlet where the plug can be easily unplugged.
Do not place or store the product or the AC adapter outdoors, near excessive dirt or dust, water,
heat sources, or in locations subject to shocks, vibrations, high temperature or humidity.
Take care not to spill liquid on the product and not to handle the product with wet hands.
Keep this product at least 22 cm away from cardiac pacemakers. Radio waves from this product
may adversely affect the operation of cardiac pacemakers.
If the LCD screen is damaged, contact your dealer. If the liquid crystal solution gets on your hands,
wash them thoroughly with soap and water. If the liquid crystal solution gets into your eyes, flush
them immediately with water. If discomfort or vision problems remain after a thorough flushing,
see a doctor immediately.
Keep ink cartridges out of the reach of children.
6