Epson PM-400 Start Here

PM-400
Start Here
Read these instructions before using your product.
1
Unpack
Note: Do not open the ink cartridge package until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials from the product.
2
Turn on and configure
1
Connect the power adapter to the side of the product.
Then connect one end of the power cord to the power
adapter and the other end to an electrical outlet.
Caution: Do not connect to your computer yet.
2
3
4 x 6-inch
paper
3
1
2
Open the cover, raise the LCD screen, and turn on the
product.
To select English as your language, press the OK button.
If you want to change the language, press
select it, then press the OK button.
Note: You can change the language later using the product's
control panel. For more information, see the online User's Guide.

Install ink cartridge

Unpack the initial ink cartridge and completely remove the
yellow tape only.
Caution: Do not remove any other labels or seals, or ink
may leak.
Remove the cap and carefully dispose of it.
Caution: Do not touch the areas shown below. Doing so may
prevent normal operation and printing.
or to