PictureMate. Open the cartridge door on the back of PictureMate. Remove the packing material from inside the cartridge slot. Close the cartridge door. *411718800* *411718800* Basics book PictureMate photo paper Power adapter Printer Software CD Initial PictureMate photo cartridge Power cable...
On button to turn on PictureMate. Remove the tape from the remote control. Now you can install your initial photo cartridge. Note: The remote control will not work unless you first press the On button on the printer. Install the Initial Photo Cartridge Turn PictureMate around and open the cartridge door. Slide the cartridge lever left to the Release position.
Slide the cartridge straight into the slot, label side up, until it clicks into place. It will not go in all the way. Slide the lever all the way right, to the Lock position. Close the cartridge door. PictureMate charges the print head for 3 to 4 minutes.
The memory card light flashes and PictureMate tells you how many photos are on the card. Note: Insert just one card at a time. PictureMate will not read multiple cards at once. Load Paper PictureMate comes with genuine Epson made especially for printing lab quality photos. Caution: Don’t load or print on plain paper; this may damage PictureMate. Open the paper support. Slide out the edge guides.
Page 5
Load up to 20 sheets at a time. Fan the sheets to slightly separate them. Place your paper into the slot between the edge guides with the glossy side up. Slide the edge guides inward slightly. Attach the output tray. Note: Keep unused paper in the original package and store it flat to prevent curling.
Page 6
PictureMate Show is a trademark of Seiko Epson Corporation. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice.