Table of Contents
Advertisement
5.2 Water connection
Improper use
Risk of damage to the appliance
• If the water pipe is new or has not been
used for a long time, before making the
connection, let the water flow to ensure
that it is clear and free from impurities.
• The inlet pressure should be between
50 kPa min. and 500 kPa max.
The openings for the water and drain
connections are located on the rear panel
of the appliance. Depending on the model,
these are used for the internal humidification
and manual washing systems.
1 Internal humidification connection.
2 Washing water inlet (on some models
only).
3 Drain outlet (on some models only).
86
Installation
Connect inlets 1 and 2 to a threaded ¾"
water outlet.
Washing water drain (on some models
only)
• The waste water may be very hot.
• The drainage pipes must be able to
withstand high temperatures (at least
90°C)
• Do not use metal pipes.
The water is discharged by gravity through
a pipe or hose connected to the
appliance's drain outlet (3) and connected
to a waste water drainage system.
The characteristics of the drainage system
must be as follows:
• Maximum length: 1 metre. Minimum
length: 30 cm.
• minimum inclination 4°.
• Minimum pipe diameter 30 mm.
High temperature water
Danger of burns
Advertisement
Table of Contents
