Table of Contents
Advertisement
2. Once the minimum temperature (60°C)
is reached, the function will end and 5
beeps will be emitted.
• "Cooling end" now appears on the
display.
• To stop the function at any time,
press the
flashing.
• To reduce the cooling time, it is
recommended to keep the door
slightly open.
In the second case, this function can be set
for manual cooking (see "Manual
cooking").
To set the cooling function:
1. Select the "Cooling" function.
2. Use the
/
target temperature that the appliance
has to reach.
• The temperature display indicates the
temperature to set (min.: 30°C - max.:
250°C).
3. Press
to confirm.
4. Press
to start the function.
• Use the
button to take you back to
the previous screen.
At the end of the function, 3 beeps will be
emitted and "Cooling end" will appear on
the display.
74
button while it is
buttons to set the
Use
Hold warm
This function does not require
preheating.
To set the hold warm function (for manual
and step cooking):
1. Select the "Hold" function.
• The default temperature of 80°C is
indicated on the temperature display.
• "--:--" appears on the time display.
2. The
,
buttons can be used to set and modify
the corresponding parameters.
(depending on the model)
Humidification can only be set if
the target temperature is at least
130°C.
If the door is open when you start cooking,
display for 2 seconds to indicate that the
door must be closed before starting the
function.
When this function is in progress, the
temperature and time can be changed
using the corresponding buttons. The other
parameters can only be changed in
standby mode.
The target temperature and the countdown
of the duration, if set, are indicated on the
displays.
When the function finishes, "Stop Hold"
appears and 5 beeps are emitted.
,
,
and
appears on the
Advertisement
Table of Contents
