Table of Contents
Advertisement
• Have qualified personnel carry
out installation and assistance
interventions according to the
standards in force.
• Do not try to repair the appliance
yourself or without the intervention
of a qualified technician.
• If the power supply cable is
damaged, it must be replaced by
the manufacturer, by Technical
Support or other qualified
personnel in order to ensure a
hazard is not created.
• Do not place containers with
liquids or food products which can
melt during cooking on the upper
shelves which are not visible.
• The floor next to the appliance
could be very slippery. Be very
careful.
• The terminal indicated by the
symbol links up parts that are
normally earthed. Connect the
appliances appropriately using
this terminal in order to make sure
that they are equipotential.
• Have the electrical connection
performed by authorised technical
personnel.
Instructions
• The appliance must be connected
to ground in compliance with
electrical system safety standards.
• Disconnect the mains power
supply.
• Do not pull the cable to remove
the plug.
• Use H07RN-F cables that can
withstand a temperature of at least
75°C.
• The tightening torque of the
screws of the terminal supply wires
must be 1.5 - 2 Nm.
Risk of damaging the appliance
• Racks and trays have to be
inserted into the side guides until
they come to a complete stop. The
mechanical safety locks that
prevent the rack from being taken
out accidentally must face
downwards and towards the back
of the appliance.
• Do not seat on the appliance.
• Do not use abrasive or corrosive
detergents (e.g. scouring
powders, stain removers and
metallic sponges) on glass parts.
• Do not use steam jets to clean the
appliance.
49
Advertisement
Table of Contents
