Smeg ALFA625EHDS Manual page 33

Manual washing system (on some
models only)
High temperature steam
Danger of burns
• DO NOT use the spray head if the oven
is hot.
• If the oven is still hot, start the Cooling
("Special functions") function and wait
until it has finished.
The appliance is equipped with a manual
washing system to make it easier to clean
the oven cavity.
Water can be dispensed directly into the
oven cavity using the retractable spray
head.
1. Extract the spray head.
2. The amount it is extracted can be
adjusted by stopping whenever you hear
a metallic click (total 4).
3. Press the button on the back of the spray
head to dispense water.
4. To rewind the hose, pull the spray head
slightly and guide it carefully into its
housing.
5. Remove any residues manually and dry
thoroughly.
Cleaning and maintenance
6. After cleaning, we recommend that you
run the appliance empty at 200°C for
15-20 minutes in order to eliminate any
residues.
During cleaning, water may reach
the front panel and the edge of the
oven cavity. This is not hazardous
and will not cause malfunctions.
Use detergents that are specific for
cleaning professional use ovens
following the instructions on the
package.
Removing the tray support frames
Removing the tray support frames enables
the sides to be cleaned more easily.
1. Unscrew the fastening ring nuts
completely.
2. Remove the tray support frames from their
seats on the deflector and remove them
from the oven.
79