Water Connection; Positioning - Smeg ALFA420H Manual

5.2 Water connection

Improper use
Risk of damage to the appliance
• If the water pipe is new or has not been
used for a long time, before making the
connection, let the water flow to ensure
that it is clear and free from impurities.
• The inlet pressure should be between
50 kPa min. and 500 kPa max.
Connect the water inlet socket on the back
of the appliance to a water socket with a
threaded ¾" opening.
52
Installation

5.3 Positioning

• Position the appliance with the aid of a
second person.
• Never use the open door to lever the
appliance into place when fitting.
• Avoid exerting too much pressure on the
oven door when open.
• Veneers, adhesives or plastic coatings
on adjacent furniture should be
temperature-resistant (no less than
90°C).
• The appliance support base should not
exceed a height of 1.60 m from the
floor.
Levelling
Level the appliance on the ground using
the adjustable feet. The foot has a range
of 10 mm.
Heavy appliance
Crushing hazard
Pressure on the open door
Risk of damage to the appliance
Heat production during appliance
operation
Risk of fire
Improper installation
Risk of injury