emmeti IM-U9132045 Manual page 8

Economy mode:
one dash lit (bottom).
Days of the week:
1 Monday .. 7 Sunday.
The box indicates the
current day or group
of days.
Off/Antifreeze mode:
no dashes lit.
To set the program schedule proceed as described below:
Note: You will exit the programming mode without memorizing
the programmed schedule if more than 10 seconds elapse
and you do not press any button; or else you can confirm
the settings in sequence by pressing the 'Ok' button without
making any changes.
1. Select the parameter 'PrOG' and press 'OK': the display will show
the ' P ' icon and the word 'dAy' and the boxes corresponding to
day or group of days will start flashing.
2. Press buttons ' ' and ' ' to set the combination of days to be
programmed.
In the following the four available combinations are listed:
1st combination
of days
2nd combination
of days
3rd combination
of days
4th combination
of days
Comfort mode:
two dashes lit.
(Schedule
Day by Day)
Note: For each day combination, the time schedule set will be
the same for all days within each single group.
3. Press the ' OK ' button to confirm the setting made; the display will
show the schedule previously programmed for the set day or group
of days and the time 00.00 (cursor flashing on the interval between
00.00 and 00.30).
4. Set the operating mode; to make the programming operation easier,
the chronostat leaves the factory preset with 4 time slots. Press
the ' ' button to scroll cyclically through the four combinations of
time slots preset in the factory.
21
(Mo) (Tu) (We) (Th) (Fr) (Sa)
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1
2
3
4
5
(Su)
6 7
6
7
6 7
6
7