1 General Information 1 General Information The DC20 is a plug & play LED driver that is designed specifically for driving Thorlabs GmbH SOLIS high-power LEDs. The DC20 circuit design allows it to control all of Thorlabs GmbH SOLIS LEDs. The EEPROM of the connected SOLIS is read-out and the current limit of the DC20 is set to the maximum current of the connected SOLIS.
LED. Switch the LED off and on again - the error should disappear. If this error persists, please contact Thorlabs for return instructions. Red-green blinking - the DC20 current is significantly out of specification; the LED might be at risk.
Thorlabs GmbH warrants material and production of the DC20 for a period of 24 months starting with the date of shipment. During this warranty period Thorlabs GmbH will see to defaults by repair or by exchange if these are entitled to warranty.
Waste treatment on your own responsibility If you do not return an “end of life” unit to Thorlabs GmbH, you must hand it to a company specialized in waste recovery. Do not dispose of the unit in a litter bin or at a public waste disposal site.
Fax: +49-8131-5956-99 Fax: +46-31-703-40-45 www.thorlabs.de www.thorlabs.com Email: europe@thorlabs.com Email: scandinavia@thorlabs.com France Brazil Thorlabs SAS Thorlabs Vendas de Fotônicos Ltda. 109, rue des Côtes Rua Riachuelo, 171 78600 Maisons-Laffitte São Carlos, SP 13560-110 France Brazil Tel: +33-970 444 844 Tel: +55-16-3413 7062...
Need help?
Do you have a question about the SOLIS DC20 and is the answer not in the manual?
Questions and answers