12V DC IMPACT WRENCH COMPONENT LIST FORWARD/REVERSE ROTATION CONTROL ON/OFF SWITCH SOFT gRIP HANDLE LED light 12V JACK PLug FuSE* DOubLE SOCKET WRENCH 21/23MM* DOubLE SOCKET WRENCH 17/19MM * SquARE RETAINER FOR SOCKET WRENCH bubbLE LEVEL (SEE F) * Not all the accessories illustrated or described are included in standard delivery. ACCESSORIES (cordless) power tool.
Page 5
12V DC IMPACT WRENCH conditions. Water entering a power tool will devices can reduce dust-related hazards. increase the risk of electric shock. 4. gENERAL POWER TOOL SAFETy WARNINgS - POWER d) Do not abuse the cord. Never use the cord for TOOL uSE AND CARE carrying, pulling or unplugging the power tool.
Page 6
12V DC IMPACT WRENCH SyMbOLS fastener may contact hidden wiring or its own cord. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and To reduce the risk of injury, user must read could give the operator an electric shock. instruction manual.
12V DC IMPACT WRENCH TECHNICAL DATA 4. SWITCH LOCK (SEE D) The on/off switch can be locked in the OFF position. Voltage This helps to reduce the possibility of accidental No load speed 3400/min starting when not in use. To lock the switch, place Impact rate 40-60/min the forward/reverse rotation control (1) in the center...
12V DC IMPACT WRENCH Use a soft, dry cloth to wipe the tool clean. Grease and oil-based grime must be immediately wiped off the tool and accessories with a slightly damp cloth. If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard.
Need help?
Do you have a question about the Shop Series and is the answer not in the manual?
Questions and answers