Individual Bits Panel And Help W Reg Button; Setting Dvdd Voltage - Texas Instruments PGA112EVM User Manual

www.ti.com
5.2.3 Setting Individual Bits
Use the Individual Bits panel to set the individual bits of the PGA112 (or PGA113) configuration register.
The panel, shown in
for information about the register.
5.2.4 Setting DVDD and AVDD
The SM-USB-DIG Platform supports two logic-level voltages: 3.3 V and 5 V. Set the voltage by using the
Vdut Voltage menu, as shown in
toggling the Power button.
SBOU073A – February 2009 – Revised May 2012
Submit Documentation Feedback
Figure 12, has a settable bank for all bits in the register. Press the Help w Reg button
Figure 12. Individual Bits Panel and Help w Reg Button
Figure 13. Disable the voltage from the SM-USB-DIG Platform by
Figure 13. Setting DVDD Voltage
Copyright © 2009–2012, Texas Instruments Incorporated
EVM Software Overview
PGA112EVM and PGA113EVM User's Guide
11