Table of Contents
Advertisement
www.ti.com
5.9
Program OTP All Channels Button
As
Figure 19
shows, pressing the Program OTP All Channels button allows you to program a gamma
curve into the nonvolatile memory in the BUF08821. All eight channels (and the V
programmed simultaneously. The values are stored in the memory bank that is selected via the BKSEL
switch (see
Section
5.10 Program OTP Out Button
Pressing the Program OTP Out button (illustrated in
channel into the nonvolatile memory in the BUF08821. This feature is useful when the V
must be programmed at different times. The values are stored in the memory bank that is selected via the
BKSEL switch. The Write OTP Reg dialog box appears.
Figure 20. Program OTP Out Button and Write OTP Reg Dialog
In the example shown in
up and down arrows to select channel 8. Then press the Write Selected Reg to OTP button.
SBOU066 – September 2008
Submit Documentation Feedback
4.1).
Figure 19. Program OTP All Channels Button
Figure
20, to program 0.996V into the nonvolatile memory of channel 8, use the
Using the BUF08821EVM Software
Figure
20) allows you to store the value of a specific
BUF08821EVM Evaluation Board and Software Tutorial
channel) are then
COM
channels
COM
17
Advertisement
Table of Contents
