Data Report - netvox R718N1 User Manual

5. Data Report

When the device is turned on, it will immediately send a version package and a cluster report which
Includes current values (mA).
Data will be reported once every 30 minutes by default setting.
Maximum time: Max Interval
Minimum time: Min Interval (Check the current voltage once per Min Interval)
Default reportchange:
Current----0x0064 (100mA)
Note:
The data transmission period of the device is subject to the programming configuration. If the minimum time of report configuration is less than 30
seconds, all counted for 30 seconds. If the the maximum time of report configuration is less than minimum time, all counted for minimum time.
The device starts sampling 15 seconds before the minimum time is due, and lasts for 15 seconds. If the current changes frequently, the sampling result
may be inaccurate. Press function key to trigger.
For the analysis of the data reported by the device,
refer to the Netvox LoraWAN Application Command document and http://www.netvox.com.cn:8888/page/index.
Data report configuration and sending period are as following:
Min. Interval Max. Interval
(Unit:second) (Unit:second)
Any
Any number
between
between 30~65535
Min.~65535
Uplink report payload example:
1 1 1
Version DeviceT ReportTyp
ype e
0x01 0x49 0x01
Uplink example:
0149012403E80100000000
The battery voltage is 3.6V, the single-phase current is 1000mA, and the multiplier is 1.
Report configuration:
Description CmdID
Device
ConfigRepo 0x01
rtReq
ConfigRepo 0x81
rtRsp
R718N1
ReadConfig 0x02
ReportReq
ReadConfig 0x82
ReportRsp
Reportable Change
number
Can not be 0.
Battery(1Byte, Current(2Bytes,Un
unit:0.1V) it:1ma)
Device
Type
MinTime(2bytes Unit:s)
Status(0x00_success)
0x49
MinTime(2bytes Unit:s)
Current Change≥ Reportable
Current Change＜Reportable Change
Change
Report Report
per Min. Interval per Max. Interval
Var(Fix=8 Bytes)
NetvoxPayLoadData
Multiplier(1Byte),the real
current should convert with
Current* Multiplier
NetvoxPayLoadData
CurrentChange(2byte
MaxTime(2bytes Unit:s)
Reserved (8Bytes,Fixed 0x00)
Reserved (9Bytes,Fixed 0x00)
CurrentChange(2byte
MaxTime(2bytes Unit:s)
4
Reserved(4Bytes,fixed 0x00)
Reserved
Unit:1mA) (3Bytes,Fixed
0x00)
Reserved
Unit:1mA) (3Bytes,Fixed
0x00)