netvox R718N1 User Manual
Wireless single-phase current detection sensor
Hide thumbs
Also See for R718N1:
- User manual (8 pages) ,
- User manual (14 pages) ,
- User manual (16 pages)
Related Manuals for netvox R718N1
Summary of Contents for netvox R718N1
- Page 1 R718N1 Model： Wireless Single-phase Current Detection Sensor Wireless Single-phase Current Detection Sensor R718N1 User Manual...
-
Page 2: Table Of Contents
Table of Content 1. Introduction................................2 2. Appearance................................. 3 3. Main Features................................3 4.Set up Instruction.................................4 4.1 Power on and Turn on / off..........................4 4.2 Join Into LoRa Network...........................4 4.3 Function Key..............................4 4.4 Data Report...............................5 5. Restore to Factory Setting............................5 6. -
Page 3: Introduction
Introduction R 718N1 series equipment is a current detection device of Netvox Class A type equipment based on LoRaWAN open protocol. It measures single-phase current through external current transformer. It is divided into: R718N17 Wireless 1-Phase Current Meter with 1 x 75A CT... -
Page 4: Appearance
2. Appearance Fig.1 R718N1 Appearance 3. Main Features Compatible with LoRaWAN protocol. Powered by 2 x ER14505 3.6V Lithium AA battery Easy set up and installation Detect current value and device movement status... -
Page 5: Set Up Instruction
The green indicator will stay on for 5 seconds to show it joins into the network, otherwise, the green indicator does not work. (2) If R718N1 had been joined into a LoRa network, remove and insert the batteries; it will repeat step (1). -
Page 6: Data Report
2. The device is at off mode by default setting after restoring to factory setting. Note: The device operation of turning off is the same as the “Restore Factory Settings” operation. 6. Sleeping Mode R718N1 is designed to enter sleeping mode for power-saving in some situations:... -
Page 7: Low Voltage Alarming
(B) When it is not in the network → R718N1 will enter sleeping mode and wake up every 15 seconds to search a network to join in the first two minutes. After two minutes, it will wake up every 15 minutes to request to join the network. -
Page 8: 10. Important Maintenance Instruction
Note: To install the battery, use a screwdriver or similar tool to assist in opening the battery cover. 10. Important Maintenance Instruction Your device is a product of superior design and craftsmanship and should be used with care. The following suggestions will help you use the warranty service effectively. •...