Advertisement
Quick Links
UM_1906_PL21_1907_140720
Getting started with the XDPL8210 reference
board using .dp Vision software
XDP
T M
digital power
Ordering code: REF-XDPL8210-U35W
About this document
Scope and purpose
The purpose of this document is to give a quick guide to operation of the XDPL8210 reference board for all
power classes of LED lighting applications, and how to use the .dp Vision software to program the operating
parameters of the digital controller XDPL8210.
Intended audience
This document is intended for anyone who wants to evaluate the XDPL8210 reference design for LED lighting
and become familiar with the XDP™ platform.
Table of contents
About this document ....................................................................................................................... 1
Table of contents ............................................................................................................................ 1
1
Tools ............................................................................................................................ 2
1.1
Required hardware and software tools .................................................................................................. 2
2
Getting started .............................................................................................................. 3
2.1
Hardware connection.............................................................................................................................. 3
2.2
Parameter configuration ......................................................................................................................... 5
Revision history ............................................................................................................................................................ 9
User Manual
www.infineon.com/ref-xdpl8210-u35w
Please read the Important Notice and Warnings at the end of this document
Revision 1.1
2019-12-17
Advertisement
Related Manuals for Infineon XDPL8210
Summary of Contents for Infineon XDPL8210
-
Page 1: Table Of Contents
Scope and purpose The purpose of this document is to give a quick guide to operation of the XDPL8210 reference board for all power classes of LED lighting applications, and how to use the .dp Vision software to program the operating parameters of the digital controller XDPL8210. -
Page 2: Tools
Getting started with the XDPL8210 reference board using .dp Vision software Tools Tools Required hardware and software tools The required hardware and software tools are listed in Table 1. Please order all the hardware tools and download and install all the software tools. -
Page 3: Getting Started
Attention: The instructions in this manual work without V AC connection. Attention: Before you connect the reference board to the mains, pay careful attention to the safety hints in the recent “REF-XDPL8210-U35W Engineering report Vx.x”. Incorrect use of the reference board could be dangerous, possibly life-threatening. - Page 4 Getting started with the XDPL8210 reference board using .dp Vision software Getting started Connect the .dp Interface Gen2 to the XDPL8210 reference board with the programming cable. .dp Interface Gen2 connection Figure 2 Connection between the .dp Interface Gen2 and the XDPL8210 reference board...
-
Page 5: Parameter Configuration
Select the appropriate .csv file to open Loading the .csv file Figure 6 After loading the parameters .csv file, a list of XDPL8210 configurable parameters will show (see the box on the left in Figure 7). These values can be modified by users and will turn blue. - Page 6 Getting started with the XDPL8210 reference board using .dp Vision software Getting started Click on the message bar for List of configurable detailed information parameters Parameters file loaded in .dp Vision Figure 7 Note: The message bar shown in Figure 7 provides detailed information.
- Page 7 1) Test configuration This function will download the parameter values from .dp Vision into the XDPL8210 RAM memory space, and it will then be followed by an automatic IC start-up for application testing with the new configuration. As long as the board is activated, the V is supplied.
- Page 8 Getting started 2) Burn configuration As the XDPL8210 chip on the 35 W reference design PCB has a first full set of parameters in its One-Time Programmable (OTP) memory space, only changed parameters are written in the OTP memory. For detailed information, please refer to the “dpvision User manual”...
-
Page 9: Revision History
Getting started with the XDPL8210 reference board using .dp Vision software Getting started Revision history Major changes since the last revision Page or reference Description of change Table 1 .dp Vision folder setup link and board image corrections Figure 3... - Page 10 Infineon Technologies hereby disclaims © 2019 Infineon Technologies AG. dangerous substances. For information on the types any and all warranties and liabilities of any kind in question please contact your nearest Infineon All Rights Reserved. (including without limitation warranties of non- Technologies office.