Inhep Digital Security IDS816 Installer's Manual page 14

IDS816 INSTALLER MANUAL
will flash. Press the [
confirm entry into program mode.
1 7 2 . P o r
1. Ensure the panel is in program mode - the READY indicator will
be flashing.
2. Enter the [LOCATION NUMBER] of the program location that you
wish to view or change.
3. Press the [
flashing and the AWAY indicator will illuminate.
4. The zone LED's will display the data stored in the program
location in binary format.
5. Enter the [NEW DATA] followed by the [
will indicate a valid entry and the AWAY indicator will extinguish.
6. If you do not wish to change the data press the [
The READY indicator will continue flashing and the AWAY
indicator will extinguish
7. Repeat steps 2 - 5 untill all the necessary locations have been
programmed.
8. Press the [#] hash key to exit program mode.
9. The READY indicator will stop flashing and the panel will return to
the standby mode.
1 7 3 . P o r
1. Ensure that the panel is in program mode - the READY
indicator will be flashing.
2. Enter the [LOCATION NUMBER] of the program location that you
wish to view or change.
3. Press the
flashing and the ARMED indicator will illuminate.
4. Enter the [SUB LOCATION NUMBER] for the program location
that you wish to view or change.
5. Press the
The READY indicator will continue flashing and the ARMED and
AWAY indicators will illuminate.
6. Enter the [NEW DATA] followed by the
will indicate a valid entry. The AWAY indicator will extinguish.
7. If you do not wish to change the data within this sublocation
press the [#] hash key. The READY indicator will continue
flashing and the AWAY indicator will extinguish.
8. Repeat steps 2 - 6 until all the necessary locations and their
sublocations have been programmed.
9. Press the [#] hash key twice to exit from program mode.
14
IDS816 INSTALLER MANUAL NO. 700-283-02B ISSUED NOV 2004 VER 2.00
!
] star key and a long beep will
g a r m m n i g S a t n d
! ] star key. The READY indicator will continue
g a r m m n i g E x e t n
!
[ ]
star key. The READY indicator will continue
!
[ ]
star key, a long beep indicates a valid data entry.
a d r L o c t a o i n s
!
] star key. A long beep
d e d L o c t a o i n s
!
[ ]
#
] key.
star key. A long beep