Intended Use; Technical Data - GU ELTRAL Z45 230V Assembly And Operating Instructions Manual

Assembly and operating instructions
ELTRAL Z45 - 230 V
Rack and pinion drive
3

Intended use

The ELTRAL Z45 - 230 V rack and pinion drive is designed exclusively to open and close
bottom-hung windows, top-hung windows, skylights, horizontal-pivot windows and projecting
top-hung windows.
Installation variants
 mounted on the frame
 mounted on the sash
Other use is considered inappropriate. Gretsch-Unitas GmbH accepts no liability for damage
arising from inappropriate use. In the case of inappropriate use, the guarantee is null and
void.
All deliveries are made on the basis of our General Terms and Conditions.
4

Technical data

Type
Thrust and pull force
Strokes
Supply voltage
Current consumption at nominal load
Power consumption at nominal load
Running speed in zero load operating mode
Double electrical insulation
Duty ratio (power-on time)
Operating temperature
Protection class of electrical equipment
Connection of one or several motors in parallel
Limit stop when opening and closing
Overload protection when opening and closing
Dimensions
The specifi cations in this table are not binding and may be changed without prior notice.
(*) the travel range can be reduced by technical intervention at the momentary-contact limit switch.
Special travel ranges are available on request
18
ELTRAL Z45 - 230 V
450 N
230, 350, 550, 750 mm (*)
110/230 VAC, 50/60 Hz
0,250 A (110V) / 0,160 A (230V)
17,5 W (110V) / 18,5 W (230V)
5,5 mm/s
Yes
S2 of 4 min
-5 °C to +65 °C
IP44
Yes, up to 10 pcs
Load cut-off
Load cut-off
115 mm x 42 m x (travel + 135) mm