Transport And Storage Of Cordless Tools - Hilti SCM 22-A Manual

Care of the Li­ion batteries
• Keep the battery free from oil and grease.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning
agents containing silicone as these may attack the plastic parts.
• Avoid ingress of moisture.
Maintenance
• Check all visible parts and controls for signs of damage at regular intervals
and make sure that they all function correctly.
• Do not operate the product if signs of damage are found or if parts
malfunction. Have it repaired immediately by Hilti Service.
• After cleaning and maintenance, fit all guards or protective devices and
check that they function correctly.
To help ensure safe and reliable operation, use only genuine Hilti spare
parts and consumables. Spare parts, consumables and accessories
approved by Hilti for use with the product can be found at your local
Hilti Store or online at: www.hilti.group.
6.1 Cleaning the dust shield
▶ Clean the dust shield on the chuck with a dry, clean cloth at regular
intervals.
▶ Clean the sealing lip by wiping it carefully and then grease it again lightly
with Hilti grease.
▶ It is essential that the dust shield is replaced if the sealing lip is damaged.
6.2 Checks after cleaning and maintenance
After cleaning or maintenance, check that all safety devices are fitted
and that they function faultlessly.
▶ To check the pivoting guard, open the guard fully by moving the guard
operating lever.
➥ The pivoting guard must close quickly and completely when the guard
operating lever is released.
7

Transport and storage of cordless tools

Transport
CAUTION
Accidental starting during transport !
▶ Always transport your products with the batteries removed!
▶ Remove the battery.
▶ Never transport batteries in bulk form (loose, unprotected).
16 English
Printed: 06.06.2019 | Doc-Nr: PUB / 5292940 / 000 / 02
2153713
*2153713*