Hilti SCM 22-A Manual page 16

2.5 Battery use and care
▶ Observe the special regulations and instructions applicable to the trans-
port, storage and use of Li-ion batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not disassemble, crush or incinerate batteries and do not subject them
to temperatures over 80 °C.
▶ Do not use or charge batteries that have suffered mechanical impact,
have been dropped from a height or show signs of damage. In this case,
always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. In this case, place the
product in a non-flammable location, well away from flammable materials,
where it can be kept under observation and allowed to cool down. In this
case, always contact your Hilti Service.
3 Description
3.1 Product overview
Auxiliary grip
@
Switch-on interlock release
;
button
On/off switch
=
Grip
%
Charge-status and fault indi-
&
cator
Release button with additional
(
function (charge status display
activation)
Chip collector
)
Pivoting guard operating lever
+
Arbor
§
Base plate
/
Pivoting guard
:
3.2 Intended use
The product described is a cordless circular saw. It is designed for cutting
metal or materials similar to metal.
The use of saw blades not in compliance with the given specification (e.g.
diameter, speed of rotation, thickness) or the use of cutting and grinding
discs or blades made from high-alloy steel (HSS steel) is not permissible.
Do not use the saw to cut wood or wood-like materials, plastics, gypsum
board, gypsum fiberboard and composite materials.
▶ Use only Hilti Li­ion batteries from the B 18 / B 22 series with this product.
10 English
Printed: 06.06.2019 | Doc-Nr: PUB / 5292940 / 000 / 02
1
∙
$
£
|
¡
Q
W
E
R
T
Z
U
I
O
Fence
Saw blade position indicator
LED / viewing window
Guard
Spindle lock button
Cutting line indicator
Clamp for fence
Battery
Clamping lever for cutting
depth adjustment
Hex key
Mounting flange
Clamping flange
Clamping screw
Direction-of-rotation arrow
2153713
*2153713*