Vaxcel T0479 Assembly And Installation Instructions

ASSEMBLY AND INSTALLATION
T0479
WARNING:
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Hardware Package (included):
Mounting plate (A)
Green Grounding Screw (E)
Outlet Box
House Grounding Wire
Green Grounding Screw (E)
Mounting Plate (A)
Mounting Screw (B)
Headless Screw (D)
Lock Nut (F)
Fixture Grounding Wire
IMPORTANT:
The sensor has an excellent photocell function
to enable the light to turn on at dusk and off at
dawn automatically.
Installation Steps
Turn off the power at fuse or circuit box.
1. Thread two headless screws (D) through the mounting plate (A), and then secure them with four lock nuts (F) (two on each
side of the mounting plate (A).) Adjust the length of the headless screws (D) if necessary.
Note: Make sure the headless screws are lined up horizontally to make the fixture level.
T
INSTRUCTIONS
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Mounting Screw (B)
Lock Nut (F)
Wire Connector (C)
Fixture
Wire
Wire Connector (C)
Ball Nut (G)
Back Plate
Photocell
Headless screw (D)
Rubber Pad (H)
Rubber Pad (H)
Ball Nut (G)
Bulb Type B
Max.60W
(not included)
Candle Tube
Socket
Metal Frame
Glass Panel
181205