Timer Assembly Replacement - Quadra-Fire Pioneer-II-C Owner's Manual

3. While holding the handle, remove the four (4) screws
at each corner of the combustion cover and fish it up
and out of the bottom of the fireplace. See Figures
4.11 & 4.12.
Figure 4.11 Removal of Combustion Cover Screws
Figure 4.12 Removal of Combustion Cover
4. Unplug the wire harness from the fans and remove
the wing nut holding the fan in place. See Figure
4.13.
Wing nut
Figure 4.13 Unplug Wire Harness
5. Lift the fan up and off of the locating pins and remove
up through the access hole. See Figure 4.14.
Handle
Wire harness
Quadra-Fire • Pioneer-II-C Owner's Manual • 4184-900 • Rev C • 02/20
Figure 4.14 Remove Fan from Access Hole
6. Install new fans in reverse order.

7. Timer Assembly Replacement

1. Remove the bottom front access panel by lifting it
up and off.
2. Remove the two (2) screws in the air chamber cover.
See Figure 4.15. Pull it down and off. See Figure
4.16.
Remove screws
Figure 4.15 Removal of Screws on Air Chamber Cover
Figure 4.16 Removal of Air Chamber Cover
23