Fan Snap Disc - Quadra-Fire Pioneer-II-C Owner's Manual

13. Install the washer and the hairpin clip back on the
rod. See Figure 4.36.
Figure 4.36 Reinstalling Hairpin Clip and Washer
14. Reinstall the air chamber cover. See Figure 4.37.
Figure 4.37 Air Chamber Cover
15. Reinstall the bottom front access panel.
16. Screw the knob back on the rod.
9. Fan Snap Disc Replacement
1. Remove the bottom front access panel by lifting it
up and off.
2. Locate the snap disc to the left of the timer assembly.
3. Remove the wires from the snap disc.
4. Remove the 1/4" bolt using a 3/8" socket along with
the bracket.
5. Pull the snap disc out of the bracket.
6. Install the new snap disc in the bracket and reinstall
in the fireplace. See Figure 4.38.
NOTE: Remember to reattach the wires.
Wires
Figure 4.38 Snap Disc Replacement
Hairpin Clip and Washer
Black Knob
Screws
Bolt
Quadra-Fire • Pioneer-II-C Owner's Manual • 4184-900 • Rev C • 02/20
Figure 4.39 Exploded View of Entire Assembly for Point of Refer-
ence only
Item Description
1 Screw 8-32 x 1/2 PPH BK
2 Washer #10 SAE ZN
3 Extension Spring
4 Timer Mechanical 12 HR
5 Slide Assembly
6 Timer Arm Assembly
7 Timer Door Assembly
8 Air Channel Bottom
9 Timer Bracket
10 Timer Base
11 Timer Handle
12 Timer Door Retainer
13 Air Channel Gasket
14 Screw 8 x 12 PPH BK
15 Spacer #8 1/4D 7/32L ZN
16 HHSS #10 x 1/4D 1/4 L BK
Qty
1
1
1
1
1
1
1
1
1
1
1
2
1
10
1
2
27